As a leading provider of network equipment for SMBs, NETGEAR® understands the importance of reliable and high performance networks. With the growth of virtualization, cloud-based services and applications like VoIP, video streaming and IP surveillance, SMB networks need to extend beyond simple reliability to higher speed and performance. The 10-Gigabit and Multi-Gigabit Smart Managed Plus Switches from NETGEAR present the right solution for this requirement; delivering unprecedented non-blocking10-Gigabit bandwidth at the most affordable cost. All of them are perfect for removing the SMB network bottlenecks caused by the proliferation of Gigabit-to-the-desktop and the upcoming 10-Gigabit/Multi-Gigabit high end workstations.

Configurable L2 Networking Features

The 10G Web Managed (Plus) Switches provide plug-and-play connectivity, in addition to configurable L2 network features in order to meet current and future needs on virtualization, converged networking and mobility.  Some of the main features include:

  • Advanced VLAN support for traffic segmentation including port-based and 802.1Q-based
  • Advanced QoS (Quality of Service) for traffic prioritization including port-based and 802.1p/DSCP-based
  • Auto “denial-of-service” (DoS) prevention
  • IGMP snooping support for multicast optimization
  • Loop detection and broadcast storm controls
  • Rate limiting and priority queuing for better bandwidth allocation
  • Port mirroring for network monitoring
  • Port trunking/link aggregation (LAG) allows for increased throughput beyond 10G or to provide redundancy across the link(s)
  • Jumbo frame support

5-Speed Networking

The all new GS110EMX, XS512EM and XS724EM comes with the revolutionary 5-speed Multi-Gigabit technology built in the NETGEAR multi-speed switches allows your devices to speed past the Gigabit barrier.

The ports automatically detects which speed is needed by the connected device and provides the adequate speed. Moreover the Multi-speed switch ports can be connected    with regular Cat5E Ethernet cables, without the need to upgrade to Cat6 wiring, therefore reducing wiring costs and hassle.

10-Gigabit Transition with BASE-T

With 10GBASE-T support, the 10G Web Managed (Plus) Switches enable a standard RJ45 Ethernet jack and existing Cat 6 or Cat 7 network cables to be used, delivering a 10X increase in network performance with minimum network changes and upgrades.

  • 10GBASE-T is backward compatible, auto-negotiating between higher and lower speeds, thereby not forcing an all-at-once network equipment upgrade
  • Cat 5/Cat 5e are supported for Gigabit speeds and Multi-Gigabit (2.5G, 5G) speeds up to 100 meters
  • Cat 6 twisted pair copper cabling supports 10-Gigabit speeds up to 45 meters
  • Cat 6a or newer Cat 7 cabling will allow for up to 100 meter 10GBASE-T connections

Smart IT, not Big IT

  • Easy-to-use web browser-based management GUI makes setup and management simple
  • Standards-based technology, ensuring interoperability with any standards-based devices in the existing network
  • Worry-free with NETGEAR ProSAFE LIFETIME Hardware Warranty
  • Minimal down-time with NETGEAR ProSAFE LIFETIME Next-Business-Day (NBD) Replacement Warranty
  • Get deployment assistance with 90-days Free 24x7 Advanced Technical Phone Support
  • LIFETIME 24x7 Online Chat Technical Support

* Looking for prior version XS708E (v1) pages? Click here.

HARDWARE FEATURES

10GBASE-T Connections

Support low-latency, line-rate 10G Copper “BASE-T” technology with backward compatibility to Gigabit Ethernet and Fast Ethernet. Cost-effectively migrate current network to 10G capacity by utilizing the existing Cat 6 RJ45 short connections (up to 45m) and Cat 6a / Cat 7 connections up to 100m.

10GBASE-X SFP+ ports

Providing flexibility to uplink to 10G-capable core or aggregation switches that support fiber links. Backward compatible to Gigabit fiber. Support copper or fiber modules.

Multi-Gigabit Connections

Support line-rate 2.5G/5G "NBASE-T" technology with backward compatibility to Gigabit Ethernet and Fast Ethernet. Upgrade your current network without upgrading your existing cabling, thanks to Multi-Gigabit you will be able to run 5G and 2.5G over connections up to 100m.

SOFTWARE FEATURES

Comprehensive QoS Features

Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video. Ingress and egress rate limiting allows for bandwidth shaping for mitigating network resources constraints or for optimizing guest access bandwidth on the network.

  • Port-based or 802.1p-based prioritization
  • Layer 3-based (DSCP) prioritization
  • Port-based ingress and egress rate limiting

IGMP Snooping

For improved network efficiency on delivering multicast traffic. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast router.

Loop Detection / Auto DoS Prevention

Detect accidental network loops and protect against DoS (Denial of Service) attacks.

Port-based & 802.1Q-based VLANs

Segment network into smaller groups for more secure and efficient use of network resources.

Port Trunking / Link Aggregation (LAG)

Build up bigger bandwidth to support aggregated uplink/downlink traffic.

Energy Effiecient Ethernet (IEEE 802.3az)

For maximum power savings and reduced energy costs.

Port Mirroring

For better and quicker network diagnostics and troubleshooting.

Cable Test

Easily identify bad Ethernet cables.

Target Application

L2 Services - VLANs

  • IEEE 802.1Q VLAN tagging
  • Port-based VLANs (physical)

L2 Services - Availability

  • Broadcast, multicast, unknown unicast storm control
  • Static manual LAGs (port trunking)
  • IEEE 802.3x (full duplex and flow control)

L2 Services - Multicast Filtering

  • IGMP snooping (v1, v2 and v3)
  • Block unknown multicast

L3 Services - DHCP

  • DHCP client

Link Aggregation

  • Static manual LAGs (port trunking)
  • 4 LAGs (XS708Ev2) or 8 LAGs (XS716E) with max 8 members in each LAG
  • GS110EMX, XS512EM, XS724EM supports LACP

Network Security

  • Broadcast, multicast, unknown unicast storm control
  • DoS attacks prevention

Quality of Service (QoS)

  • Port-based rate limiting (ingress and egress)
  • Port-based QoS
  • IEEE 802.1p COS
  • IPv4 DSCP
  • IPv4 ToS
  • Weighted Round Robin (WRR)

Management

  • Password management
  • Web browser-based graphical user interface (GUI) for advanced configuration and management
  • ProSAFE Plus Configuration Utility (PCU) for multi-switch management (requires Windows PC)
  • Firmware upgrade via HTTP (Web GUI) or TFTP (Plus Utility)
  • Config file transfers (backup, restore) using web browser-based management GUI or Plus Utility
  • Port mirroring; many-to-one port mirroring
  • Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by default)
  • Short cable power reduction
  • Auto power-down

NETGEAR Warranty

  • This product is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.
  • Lifetime Next Business Day Hardware Replacement. Click here for coverage, availability and terms and conditions.
  • ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
  • ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).

1 IGMP v3 source filtering not supported

Filter
  • Number of Active Ports
  • Number of 5-speed Ports (100M/1G/2.5G/5G/10G)
  • Number of 100M/1G/10G Copper Ports
  • Number of 10G SFP+ Ports
View:

The combination of filters you have selected has not produced any results. Please adjust your selection.

XS708Ev2

Model: XS708Ev2

XS716E

Model: XS716E

GS110EMX

Model: GS110EMX

XS512EM

Model: XS512EM

XS724EM

Model: XS724EM